CRESTRON AV3 3-Series Control System (B-Stock) MSRP Price : $4,400.00 Price : $2,200.00 Company: CrestronCamcordersMPN: AV3 (6504878) SKU: EAR-CRE-AV3 Product tabsDescriptionA rack-mountable 3-Series control processor offering immense power, expanded memory, numerous integrated control ports and optional control card expansion slots. Features an isolated control subnet providing a Gigabit Ethernet LAN dedicated for Crestron devices. Technical specificationsControl Engine Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs Memory SDRAM 1 GB Flash 4 GB Memory Card Supports SD and SDHC cards up to 32 GB External Storage Supports USB mass storage devices up to 1 TB Communications Ethernet 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode Cresnet Cresnet master mode USB Supports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port RS-232/422/485 For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485 IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud Connectors & Card Slots S1 – S3 (3) 3-Series control card expansion slots (optional)[3] COM 1 – 2 (2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232/422/485 ports [4]; Up to 115.2k baud; hardware and software handshaking support COM 3 – 6 (4) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports [4]; Up to 115.2k baud; software handshaking support IR - SERIAL OUTPUT 1 – 8 (2) 8-pin 3.5 mm detachable terminal block; Comprises (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud RELAY OUTPUT 1 – 8 (2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts LAN (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4];Connects to the customer's LAN CONTROL SUBNET (1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Provides a dedicated local network for Crestron devices USB (1) USB Type A female; USB 2.0 port for storage devices MEMORY (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion I/O 1 – 8 (1) 9-pin 3.5 mm detachable terminal block; Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled; Programmable 5 Volts, 2k Ohms pull-up resistor per pin NET (1) 4-pin 3.5 mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices [4];See "Power" section for additional specifications 100-240V~2.4A 50/60Hz (1) IEC 60320 C14 main power inlet; Mates with removable power cord, included G (1) 6-32 screw; Chassis ground lug COMPUTER (front) (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only Controls & Indicators PWR (1) Green LED, indicates operating power supplied from AC line NET (1) Amber LED, indicates communication with the Cresnet system MSG (1) Red LED, indicates control system has generated an error message HW-R (1) Recessed pushbutton for hardware reset SW-R (1) Recessed pushbutton for software reset CNPS FAULT (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots [3] LAN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity CONTROL SUBNET (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity Power Main Power 2.4 Amps @ 100-240 Volts AC, 50/60 Hz Available Cresnet Power 75 Watts (3.125 Amps @ 24 Volts DC) Environmental Temperature 41° to 113° F (5° to 45° C) Humidity 10% to 90% RH (non-condensing) Heat Dissipation 45 BTU/hr with no Cresnet devices, no control cards; 71 BTU/hr with full Cresnet load, no control cards;See individual control card spec sheets for additional specifications Enclosure Chassis Metal, black finish, vented top and sides Faceplate Extruded metal, black finish, polycarbonate label overlay Mounting Freestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included) Dimensions Height 3.47 in (89 mm) without feet Width 17.28 in (439 mm); 19.00 in (483 mm) with rack ears Depth 10.06 in (256 mm) Weight 4.0 lb (1.9 kg)