CRESTRON AV3 3-Series Control System (B-Stock)MSRP Price : $4,400.00Price : $2,200.00Company: EARCamcordersMPN: CRE-AV3 SKU: EAR-CREAV3Product tabsDescriptionA rack-mountable 3-Series control processor offering immense power, expanded memory, numerous integrated control ports and optional control card expansion slots. Features an isolated control subnet providing a Gigabit Ethernet LAN dedicated for Crestron devices.Technical specificationsControl EngineCrestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programsMemorySDRAM1 GBFlash4 GBMemory CardSupports SD and SDHC cards up to 32 GBExternal StorageSupports USB mass storage devices up to 1 TBCommunicationsEthernet10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [2], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail clientControl Subnet10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation ModeCresnetCresnet master modeUSBSupports USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device portRS-232/422/485For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485IR/SerialSupports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baudConnectors & Card SlotsS1 – S3(3) 3-Series control card expansion slots (optional)[3]COM 1 – 2(2) 5-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232/422/485 ports [4]; Up to 115.2k baud; hardware and software handshaking supportCOM 3 – 6(4) 3-pin 3.5 mm detachable terminal blocks; Bidirectional RS-232 ports [4]; Up to 115.2k baud; software handshaking supportIR - SERIAL OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal block; Comprises (8) IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baudRELAY OUTPUT 1 – 8(2) 8-pin 3.5 mm detachable terminal blocks; Comprises (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contactsLAN(1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4];Connects to the customer's LANCONTROL SUBNET(1) 8-pin RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port [4]; Provides a dedicated local network for Crestron devicesUSB(1) USB Type A female; USB 2.0 port for storage devicesMEMORY(1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansionI/O 1 – 8(1) 9-pin 3.5 mm detachable terminal block; Comprises (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4]; Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1; Digital Output: 250 mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled; Programmable 5 Volts, 2k Ohms pull-up resistor per pinNET(1) 4-pin 3.5 mm detachable terminal block; Cresnet master port, outputs power to Cresnet devices [4];See "Power" section for additional specifications100-240V~2.4A 50/60Hz(1) IEC 60320 C14 main power inlet; Mates with removable power cord, includedG(1) 6-32 screw; Chassis ground lugCOMPUTER (front)(1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup onlyControls & IndicatorsPWR(1) Green LED, indicates operating power supplied from AC lineNET(1) Amber LED, indicates communication with the Cresnet systemMSG(1) Red LED, indicates control system has generated an error messageHW-R(1) Recessed pushbutton for hardware resetSW-R(1) Recessed pushbutton for software resetCNPS FAULT(1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indicationSLOT 1 – 3(3) Green LEDs, indicate control cards are inserted in the corresponding slots [3]LAN (rear)(2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activityCONTROL SUBNET (rear)(2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activityPowerMain Power2.4 Amps @ 100-240 Volts AC, 50/60 HzAvailable Cresnet Power75 Watts (3.125 Amps @ 24 Volts DC)EnvironmentalTemperature41° to 113° F (5° to 45° C)Humidity10% to 90% RH (non-condensing)Heat Dissipation45 BTU/hr with no Cresnet devices, no control cards; 71 BTU/hr with full Cresnet load, no control cards;See individual control card spec sheets for additional specificationsEnclosureChassisMetal, black finish, vented top and sidesFaceplateExtruded metal, black finish, polycarbonate label overlayMountingFreestanding or 2 RU 19-inch rack-mountable (adhesive feet and rack ears included)DimensionsHeight3.47 in (89 mm) without feetWidth17.28 in (439 mm); 19.00 in (483 mm) with rack earsDepth10.06 in (256 mm)Weight4.0 lb (1.9 kg)